Serving the Industrial, Municipal,
and Commercial markets since 1984
               
 
Products :: Portable Hoists & Winches :: Hand Winches :: Worm Gear Hand Winches :: 500 lb Open Gear Model

  PERFORMANCE CHARACTERISTICS
load rating (lb)                      drum capacity1
model
number
description1st
layer
mid
drum
full
drum
wire rope
diameter
1st
layer
mid
drum
full
drum
gear
ratio
force
to lift
1000 lb
approx.
ship
wt. lb
465open gears
(recommended for pulling only)
7505103701/8
3/16
7
4
58
26
130
58
20:121 lb12
1Actual drum capacities may be 25-30% less, due to non-uniform winding. Tension in the wire rope will also affect drum capacity.
  Open Gear Worm Gear Hand Winch

Model 465 Worm Gear Hand Winch
Model 465

 
Machine Cut Spur Gearsprovide accurate operation and long lasting service.

Enclosed Oil Bath provides continuous lubrication of gears to minimize wear, except on Model 465. On Model 4WM2 oil seals keep oil in and dirt out.

Hex Drive and handle are included. Model 4WM2 can be power driven with a maximum 400 rpm drill-motor.

Automatic Brake Models provide positive load control for lifting. Brake models have a PB or B suffix. Model 4WM2 features an internal mechanical brake.

Corrosion Resistant durable paint finish protects against corrosion in harsh environments.

Bronze Bearings on most models for smooth operation.

Large Diameter Drums minimize wear to extend wire rope life.

Handles Adjust in length to change force required to move the load.

Mounting Optionsinclude floor, wall, or ceiling. Add 10% for factory modification for wall or ceiling mount, adapter plate may be required.

Wire Rope Assemblies sold separately.  
GO TO:
  Home | Products | Inquiry form | Newsletter | Contact us
  © Mapeco.com, 2001